T-shirt printers need to be protected from moisture

In the printing factoryT-shirt printerIt is necessary production equipment, so we need to maintain and maintain it scientifically. In a humid environment, the internal board components are easily damp and corroded, and even cause a short circuit of the circuit, causing the board card nozzle to burn. So what should we pay attention to in a humid environment?

1. Should moisture-proof measures be taken in the production workshop? Ventilation openings such as doors and windows must be closed when leaving get off work at night to prevent morning mist and morning frost from being sucked into the workshop.

2. After get off work, use dust clothDigital printing equipmentThe purpose of the cover is very simple. In addition to dust, the dust-proof cloth can also prevent moisture from entering the interior and causing short circuits of related circuit boards and components.

3. Relevant printing media consumables must be stored in a dry environment, because the printing media can easily absorb moisture and get damp, and damp media can easily cause the ink to scatter. Therefore, the materials should be put back in the original packaging when they are not used up, and try not to touch the ground and walls.

four,Cotton direct injectionIf possible, it is recommended to equip the exhaust fan in the working environment of the digital printing processing workshop, and install the air conditioner to start the dehumidification mode, but the effect is not very good; if the humidity is serious, it is recommended to install a dehumidifier.