Five precautions for digital direct jet printing machine

No matter what typeCotton Direct Injection MachineWhen we use it, we should pay attention to maintenance, not only because the price of the digital printing machine is relatively high, but we must fundamentally reduce the cost to create more profits. So what should we pay attention to when using a flat-plate digital direct-injection printing machine?

1. After the digital direct printing machine is completely shut down, turn off the power and network cable, otherwise it will seriously damage the printer port and PC motherboard. Cause unnecessary losses.

Direct jet printing machine

2. When using the machine to print, first check whether the two sides of the printing machine are parallel, whether it will cause uneven printing and cause waste.

3. Regular inspectionT-shirt direct printing machineThe ink pump, ink pad. Ink cartridges, if the ink pump does not rotate or the speed does not meet the demand for ink supply, the ink supply motor will continue to run. If the ink cartridge is short of ink or the ink cartridge is in ink supply state for a long time, it must be replaced in time. Whether the ink pad is loose. It needs to be fixed to protect the nozzle.

4. Before starting the machine, observe whether there are accumulated items on and around the printing machine. To do a good job of sanitation around the machine environment, check the ink supply every day, and replace the ink in time when the ink is about to bottom out to avoid air being drawn in the ink tube.

5. After shutting down, putDigital t-shirt printing machineThe head is controlled to the original position to avoid re-cleaning the nozzle when the machine is turned on next time, which will waste a lot of ink, and the nozzle will be sealed by the protective cover in the original position, so that the nozzle is not easy to be blocked, which ensures the nozzle and the machine Long service life, and save a lot of ink supply cost and resource saving.