T-shirt direct printing machine printing program steps

BuyingDigital Direct Printing Machine, How are the processes and operating steps performed? Here, Hongyin Digital will share with you the steps of the cotton direct-injection printing solution.

The cotton direct-injection printing process technology is actually very simple, the picture RIP processing-GG gt; spray pre-treatment liquid-GG gt; direct-injection printing-GG gt; color fixation, seemingly simple, but still have a certain know-how, master If you don't get the essentials, either the printed effect is not satisfactory, or the color is easily washed off.

1. Picture RIP processing
For a T-shirt to print better, the picture effect must be good, the impurities in the picture must be cleaned, and the color blocks that are prone to color difference must be fine-tuned in the picture processing software (this requires long-term experience accumulation ), in this way, you can ensure that the picture you want is the effect you want.

Two, spray pretreatment liquid
Before the pure cotton T-shirt is fixed on the platform, it needs pre-treatment. The pre-treatment liquid of light-colored pure cotton fabric is different from that of dark-colored pure cotton fabric. The pre-treatment liquid of light-colored fabric is mainly Used to increase the vividness of the pattern, the pre-treatment liquid of the dark cotton fabric is used to produce a chemical reaction with the white ink used for the primer, so that the white ink can be firmly absorbed on the dark cotton fabric. The tools are diversified. You can use professional spray coating equipment or electric spray cans. In the process of spraying, it must be sprayed evenly and in sufficient amount. The effect of uneven or insufficient printing will not be good, and it is easy to wash off, and excessive spraying will easily cause waste. DuPont's pre-treatment liquid is not cheap and it is not good to use. , The cost of spraying a piece of clothing may exceed the cost of white ink.

three,Digital printing equipment

Use T-shirt treadmill or flying fish T-shirt cutting digital printing machine, you can easily complete

Four, high temperature fixing
FromT-shirt direct printing machineThe T-shirt that comes out is actually just a semi-finished product. After the color is fixed, the pattern will not fall off. There are certain tricks to fix the color. If the temperature is too high, it is easy to damage the fabric. If the temperature is too low, the color fastness will be improved. Not enough. If the time is too long www.hongink.cn, it is easy to damage the fabric. If the time is too short, the pattern will be washed off. The final garment.