Reminder: The digital printing machine should be overhauled regularly

The digital printing industry has developed to this day, with great progress, not only printingflowerFaster and faster, printingFlower machineThe accuracy is getting higher and higher. And high penetration sealFlower machineAnd variant sealFlower machineThe plan also has a big breakthrough. It can be said that whether it is in other countries in the world or in China, digital printing is forming a trend of the times, especially now that environmental problems are becoming increasingly prominent. Compared with traditional printing, digital printing has more obvious advantages. So digitalPrinting machineThe machine has become the sweet pastry of the printing and dyeing industry. DigitalprintingThe machine is a relatively large part, and the price is high when purchasing, not to mention the later application production, if it fails, basically it can only stop production. How to maintainDigital printing machine, It is very important to make it in the best working condition.

How to maintain digitalprintingWhere's the machine?

The first is the maintenance of the nozzle.

1. Do not install or dismantle the digital arbitrarily when the power switch is not turned off or the main power is not disconnectedPrinting machineCircuit

2. Pay attention to hand strength when replacing the nozzle and adjusting, and don't let brute force break;

Clean the nozzle regularly;

4. New ink sacs should be replaced regularly, like Taito’s eight-head machineChange once every 3 months;

Five, don't bePrinting machineWhen mixing two different inks;

6. After removing the nozzle, it should be cleaned up and put in a special container to avoid dust and dirt from polluting it;

7. Don't use poor quality media, if the media is too poor, it is easy to damage the nozzle;

A test must be done before the end of each inkjet operation to ensure that all nozzles can ink normally.

Second, keep the environment clean.

1. The room must be dust-proof and not placed in an environment prone to smoke and dust. It is best to use a vacuum cleaner to clean the floor;

The second is to try to keep the ambient temperature and humidity constant, the general temperature isAround 25 degrees, humidity is around 60%;

3. Keep the surface of the machine empty and do not place any objects, especially liquids;

There should be no commonly used household appliances near the machine, and keep it away from large magnetic fields and electric fields.

Repair and maintenance of machine parts.

The first is to regularly check and maintain important parts, wear and replace them, and repair them in time after failure;

Good habit should be developed in daily inspections, pay attention to the printing effect when printing, and solve problems in time.

Digital printing has developedFor more than 20 years, but in the last 2-3 years, high-speed dataCode printing machineThe technique really began to be accepted by the market. As far as digital printing technology is concerned, now is a breakthrough period of rapid technological development, and the joint efforts of inkjet, ink and mechanical integration are required to accelerate the maturity and leap of technological progress. versusThe newly launched Tiancai seven-head printers on the market of 200㎡/h and 280㎡/h are the same as Taito's eight-head printers. These high-speed digital printers are relatively expensive and are basically industrial-grade printers, suitable for large-scale and large-scale production. Production, once put into production, the task to be undertaken is the printing task for tens of hours and kilometers. Therefore, the maintenance of the machine at ordinary times is more worthy of attention.