Maintenance method of T-shirt printer

Now people are very familiar with printed clothing, especially T-shirts with personalized printed patterns in summer, which are especially popular among young people. And because of the low manufacturing cost and variety of such T-shirts, it has attracted many young entrepreneurs. In addition to condensing the creativity of those designers, these T-shirts with personalized printing patterns are also indispensable equipment for the finished product.

Our most commonT-shirt printerIncluding the following types, screen printing machines, cold transfer printing machines, thermal transfer printing machines, heat transfer machines. Because it belongs to the category of special machines, it meets the requirements of small batches and multiple varieties of special machines by clothing companies, so there may be dozens to hundreds of varieties and specifications of clothing printing machines, and the angle of classification is also different. According to the driving mode of printing, there are pneumatic, hydraulic and computer categories.

According to the printing method, there are roller type printing machine and flat type printing machine. In recent years, some companies have developed and put into production cold transfer printing machines. Nowadays, printing machines can be broadly divided into thermal transfer printing machines and cold transfer printing machines. The biggest difference is that the former is necessary and necessary for printing. For heating, the latter works without temperature at all.

Digital Direct Printing MachineThe maintenance is also a part that has to be learned. The following content editor lists the maintenance methods of the garment printing machine for everyone. I hope everyone can learn how to maintain it after buying a suitable one.
The main maintenance instructions are as follows:
First: the bottom wheel, when cleaning the Taiwan glue on the countertop, avoid the glue sticking to the bottom wheel. After cleaning, check whether the bottom wheel has glue on the bottom wheel. If there is any glue, wipe it with a dry cloth, otherwise it will directly affect The accuracy of printing;
Second: The upper air source processor needs to be turned off and drained twice a day; aerosol oil, adjusted to 4-5 drops per minute, and turned off when refueling;
Third: Emergency stop switch, during use, the emergency stop switch on the printing machine should be used as little as possible to avoid the emergency stop affecting the life of the chain, towline and timing belt;
Fourth: optical axis (machine movement part), butter twice a week;
fifth:Clothing digital printing machineFor joint heads, you can drip butter (10-20g per week/time) and engine oil (1-2 drops, 3 days/time).