Digital t-shirt printing machine toning

Digital t-shirt printing machineColor grading mainly starts from two aspects:

1. Adjust through image processing software, which tests the design skills of the operator.

2. Adjust by the printing software matched with the direct-injection printing machine. Through continuous adjustment, it can generally be close to the original image.

Color grade with image processing software

The pattern sprayed by the digital t-shirt printing machine generally has a certain color difference with the original image. Different patterns may have different color differences. When the color difference is not within the acceptable range, we generally choose to use image processing software to adjust Color, common AI, PHOTOSHOP, etc., are all possible. After adjustment, test print on the machine, and then compare with the original image, and so on until it is close to the original image, which tests the design skills and graphics of the operator The proficiency, patience, experience, etc. of handling software operations are the reason why I have said that "direct printing machine is not difficult to operate, but the first requirement is that you must have a person who understands drawing."

T-shirt direct printing machine is toned by printing control software

versusT-shirt direct printing machineThe supporting printing control software also has a simple color adjustment function, but the scope of this adjustment is limited. It can only adjust the style of the entire picture, such as a bit darker and bluer, and cannot be adjusted locally. Use it rarely.

Of course, sometimes, no matter how you color the T-shirt direct-injection machine, you are not satisfied. There may be such a situation. The reasons are as follows:

1. Ink color density

When the color density of the ink is low, when printing dark colors, no matter how you adjust it, you cannot achieve a satisfactory level. For example, if you want to print dark black, but the ink density of black is just low, no matter how you adjust it The color is always light black when printed.

2. Curve

When the ink does not match the board card and RIP software of the pure cotton direct-injection machine, the color difference of the printed pattern will be very large. No matter how you color it, it is impossible to approach it. After changing the ink brand and model, there will usually be Such a situation.

3. Waveform

Cotton Direct Injection MachineThe effect of the waveform on the pattern is also great, which generally depends on the board provider.