Main points of daily maintenance of treadmill digital direct-injection printing machine

Daily maintenance is something that many equipment need to do,Treadmill printing machineThe same is true, daily maintenance can extend the service life of the treadmill digital direct-injection printing machine and increase the production efficiency. But you need to pay attention to the following things during daily maintenance:

(1) Do not remove the nozzle from the treadmill digital direct-injection printing machine and place it alone, especially in the shape of high temperature and low humidity. If it is left for a long time, the water contained in the ink will gradually evaporate, and the dry ink will cause nozzle clogging. Assuming that the nozzle is clogged, the cleaning operation should be aborted. If cleaning fails to achieve the purpose, replace with a new nozzle.

(2) Avoid collision with fingers and toolsGarment printing machineNozzle surface to prevent damage to the nozzle surface or blocking of the nozzle by debris or oil. Do not blow air into the nozzle area, do not get sweat, oil, chemicals (alcohol), etc. on the nozzle, which may cause changes in the composition and viscosity of the ink, and cause ink condensation and blockage. Do not wipe the nozzle surface with facial tissue, lens paper, cloth, etc.

(3) Do not turn off the power when the treadmill digital direct-injection printer is in the printing process. The power can be cut off first, whenT-shirt direct printing machineThe power can be blocked behind the nozzle cover, and then unplug the treadmill digital direct printing machine. The cap operation cannot be performed, and the dry air from the nozzle will cause the ink to dry up.