How to achieve the best effect in the transfer process in digital printing?

In the digital printing process, garment fabric garment printing, fabric transfer is divided into piece transfer and garment transfer. In the whole process of this transfer, the way of transfer of cut piece and garment It's about the same. How to make the inkjet thermal transfer paper achieve the best condition in the whole transfer process?

①Before mass transfer, please make transfer samples first to determine the temperature and time of the transfer machine that is harmful to the color.

②Before the transfer, make sure that the inkjet thermal transfer paper is based to prevent incomplete transfer and dirt.

③Blowing inspection and combing of inkjet thermal transfer paper pattern design and fabrics should be carried out before transfer, and the shredded paper, cilia and other appendages on the fabric and inkjet thermal transfer paper should be removed to prevent such dirt from being caught Inkjet thermal transfer paper and fabric cause clothing printing defects.

④The overlapping image is usually caused by the pressure plate separation rate being too fast, and the upper pressure plate cyclone sucks the inkjet heat transfer paper. At this time, the overflow valve should be adjusted to make the cylinder (or hydraulic cylinder) separation rate of the flat heat transfer machine. It is very slow to prevent the transferred inkjet thermal transfer paper from being sucked up and then falling, causing the secondary transfer to be lifted and overlapping images. To prevent double shadows, it is also possible to dip cold water on the four corners of the inkjet thermal transfer paper to adhere to the fabric for transfer or use inkjet thermal transfer paper.

⑤Because the gasket material (cotton cloth, sponge, cardboard, etc.) of the base plate will absorb the ink moisture and accumulate, it will cause excessive water vapor during transfer, which makes the color of the pattern design on the transfer cloth lighter, and some appear The aerosol is wavy, so before transfer and during the whole transfer process, it is often necessary to air press twice to evaporate the body moisture on the gasket cotton cloth. If there is a standard, the dry pad can be replaced immediately Sheet material to prevent this kind of situation.

⑥ Pay attention to the safety of the actual operation during the whole process of flat plate transfer. It is forbidden to reach under the pressing plate and pay attention to prevent high temperature burns.