Summer maintenance tips for digital direct jet printing machine

Summer is coming, as the weather gets hot day by day, everyone starts the summer mode, butDigital Direct Printing MachineHow to spend the summer?

Temperature control

If the temperature is too high, some UV printers will have ink flying or fuzzing. It is recommended to control the indoor temperature. The UV machine should be placed in a cool, backlit corner to avoid high temperature and direct sunlight. The suitable indoor temperature is 19℃～32℃, and the humidity is 25%～70%. If the working environment of digital printing equipment is too hot, please install cooling equipment in the workshop.

Print test

Due to the high temperature, the ink evaporates quickly,T-shirt printerStart printing about one square meter of material every day, and check whether the printing effect is normal, so as not to block the nozzle and damage the nozzle.

Power-off moisturizing

When the digital printing equipment is not working for a long time, you can choose to cut off the power and keep the machine in the standby state, so the temperature will rise.

Clean in time

On a weekly basis, it is important to clean the inside and outside of the digital printing equipment, especially in key positions such as the head and guide rails. The position of the flat wire must be checked every day when the machine is turned on, and timely confirm whether the surface is clean, whether the connection is tight and not loose.

At lastDigital printing equipmentAs a high-precision printing device, you must pay attention to the maintenance of the device during its work, so that the device can work more stably.