Color matching skills of clothing digital printing machine

The key to color mixing of direct-injection printing machineStart with two levels: 1. Adjust according to the image processing software, which tests the basic skills of the operator’s design plan; 2. Adjust according to the printing software supporting the direct-injection printing machine. According to continuous adjustment, it can generally be close to the original photo.

1. Color according to the image processing software

The pattern design sprayed by the direct-injection printing machine generally has a certain color cast from the original photo. For different pattern designs, the color cast size is likely to be different. When this color cast is not within the scope of acceptance , Everyone generally chooses to use image processing software to color, it is commonAI, PHOTOSHOP, etc., are all possible. After the adjustment, you can test print on the computer, and then compare with the original photo. It will work until it is close to the original photo. This tests the basic skills of the operator’s design plan. The mastery, care, work experience, etc. of the graphics processing software operation are the reason why my work experience says "the operation of the direct printing machine is not too difficult, but the prerequisite is that you must have a person who knows how to draw".

2. Color according to the printing control software

The print control software supporting the direct-injection printing machine also has a simple color adjustment function, but the scope of this adjustment is relatively limited. It can only adjust the design style of all the pictures, such as darker and bluer, not part of it. Adjustments, so as dispensable, they are rarely used.

Of course, sometimes, no matter how you grade the color, it is not satisfactory. It is possible that such a situation is also possible, for the following reasons:

1. Ink color density

If the color density of the ink is low, in the case of printing dark tones, no matter how you adjust it, you cannot achieve a satisfactory level. For example, if you want to print dark black, the ink density of black is just right. Low, no matter how the color is adjusted, the print is light black from beginning to end.

2. Curve graph

When the board of ink and direct-injection printing machine,When the RIP software is not matched, the color cast of the printed pattern design will be very large, no matter how you color it, it is unlikely to be close to each other. After the ink brand and model specifications are replaced, it will usually be in that situation.

3. Waveform

The actual effect of the waveform on the pattern design is also very harmful, which generally lies with the board provider.